AUDISON APBMW S8-2
Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.
The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.
|Size||mm (in.)||200 (8)|
|Frequency Response||Hz||40 ÷ 500|
|Magnet size D x d x h||
|48 (1.89) x 18 (0.71) x 7 (0.28)|
|Weight of one speaker||kg (lb.)||1,21 (2.67)|
|Voice Coil Ø||mm (in.)||50 (2)|
To maximize performance while minimizing bulk and weight.
To increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box.
For a considerable power dissipation and stability even during high excursions.
For OEM placements.
In combination with AP 8.9 bit in active multi-amplification.