SUBWOOFER FOR BMW-MINI

Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.

The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.

Component		Woofer
Size	mm (in.)	200 (8)
Power Handling	W peak W continuos	300 150
Impedance	Ω	4
Frequency Response	Hz	35 ÷ 500
Magnet size D x d x h	mm (in.)	48 (1.89) x 18 (0.71) x 7 (0.28)
Weight of one speaker	kg (lb.)	1,21 (2.67)
Voice Coil Ø	mm (in.)	50 (2)

Neodymium Magnetic group

To maximize performance while minimizing bulk and weight.

Developed with electroacoustic parameters customized for BMW-Mini

To increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box.

38 mm voice coil wound on aluminium support

For a considerable power dissipation and stability even during high excursions.

Two 5 mm gaskets provided

For OEM placements.

2 ohm configuration for maximum output

In combination with AP 8.9 bit in active multi-amplification.

AUDISON

AUDISON APBMW S8-4.2