Upgrade your Chrysler's stereo

Chrysler's Pacifica and Voyager offer first-rate performance and roomy cabins for passengers and cargo, but their dashboards make it difficult to upgrade the factory radio. The iDatalink KIT-PAC1 (along with the Maestro ADS-MRR module or ADS-MRR2 module, sold separately) gives you everything you need to install an iDatalink-ready double-DIN (4" tall) stereo and wire it up to your Chrysler. The kit includes a media hub adapter that lets you keep your USB and AUX inputs, and you'll also retain your steering wheel audio controls, factory amplifier (if present), backup camera, rear seat entertainment (RSE) system, vehicle settings, and and radio information in the instrument cluster.

When used with a NAV receiver, the kit supplies the parking brake, foot brake, reverse, and VSS Vehicle Speed Sense (VSS) outputs you'll need. And it's simpler to install than you might think; check out the iDatalink installation video at the top of this page. Two replacement air vent trim panels in different colors let you match the original trim, and the gloss black dash panel finish matches your factory dash. This kit is compatible with 2017-up Chrysler Pacifica and 2020-up Chrysler Voyager models with factory 4" or 8.4" screens.

READ LESS

Product highlights:
allows you to install an an iDatalink-ready double-DIN radio in your Chrysler (also requires the Maestro ADS-MRR or ADS-MRR2 module)
two sets of air vent trim panels match your vehicle's factory trim
retains factory steering wheel audio controls
retains factory amplifier and fader (if equipped)
retains factory USB port, AUX input, and factory rear seat entertainment (RSE) system
retains radio information view in factory instrument cluster
provides outputs (parking brake, foot brake, reverse, and VSS Vehicle Speed Sense [VSS]) for NAV receivers

What's in the box:

iDatalink KIT-PAC1 Factory System Adapter owner's manual

Dash-panel
2 Support brackets
2 ISO-brackets
2 Silver trim-pieces (pre-installed)
2 Black trim-pieces
USB/AUX circuit board
Wiring harness
USB harness
Antenna adapter
2 Panel-clips
10 Speed-clips
6 Machine screws
2 Course-thread screws
Quick Start Guide

COMPUSTAR

iDatalink KIT-PAC1