My Cart

Close

KICKER

KICKER IQ500.2 Q-Class Amplifier

$404.96 USD $449.95 USD
42IQ5002

These all-new IQ Amplifiers are best described as very complex and technically “cutting-edge,” while being remarkably easy and rewarding to use.

IQ500.2

The IQ500.2 Two Channel Amplifier brings stunning clarity to your vehicle in an attractive black aluminum chassis. A blue LED light tells you the amp is on, and ready to rock!

While the amplifier easily connects to nearly any radio in the market, its connectivity doesn’t stop there. With the optional IQI™ Bluetooth interface, your phone can replace the radio as the audio source. In addition to allowing phone voice commands as well as receiving/placing calls, it also allows wireless operation of the free TWEEQ app on your iOS and Android devices.

The IQ500.2 delivers 125 watts x 2 at 4Ω and 250 watts x 2 at 2Ω. See below for more details.

Specifications
RMS Power [Watts]
@ 14.4V, 4Ω stereo, ≤ 1% THD+N : 125 x 2
@ 14.4V, 2Ω stereo, ≤ 1% THD+N : 250 x 2
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 500 x 1
Length [in, cm]
9-7/16, 24
Height [in, cm]
2-1/16, 5.2
Width [in, cm]
7-9/16, 19.1
Frequency Response [Hz]
20 - 20k
Signal-to-Noise Ratio [dB]
>95, A-weighted, re: rated power
Input Sensitivity
Low Level: 125mV-5V
High Level: 250mV-10V
Selectable Electronic Crossover
OFF/HP/LP; Variable 40Hz–180Hz @ 24dB/Octave
KickEQ™ Bass Boost (end panel adjustable)
Variable 0–12dB @ 40Hz
"KickEQ+™ Parametric Bass Boost
(Remote Control Adjustable)"
Boost : Variable 0-18db @ 40Hz
Adjustable Center Frequency : 24Hz-80Hz
Bandwidth : .5-10
Subsonic Filter
25Hz, 24dB/octave
Remote Bass
yes
Graphical User Interface Control (each channel)
Selectable Active Crossover
Variable High Pass 10-100Hz, Variable Low Pass : 40-200Hz
Ajustable Butterworth slope : OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope : OFF, 6 or 12dB/Octave
KickEQ™
Graphic 31 Band, 1/3 octave, + or - 12dB
Time Delay
Adjustable Delay : 0-20ms
Adjustable increments : .02ms, .1 ms and 1.0 ms
Compressor
Adjustable Attack and Release time; Adjustable 1:1 - 10:1 ratio
Adjustable Threshold, -80 - 10dB
Input Mixer
Maps signal inputs to specified speaker outputs
CEA Specifications
CEA Power
125 x 2 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
CEA Signal-to-Noise Ratio
-80dB CEA-2006B (ref: 1W, A-weighted)