My Cart

Close

ROCKFORD FOSGATE

ROCKFORD FOSGATE Power 13" T2 Single 1-Ohm Subwoofer

$999.99 USD $1,249.99 USD
T2S1-13

The Power T2S1-13 subwoofer features 13-inches of effective radiating cone area and a single 1-ohm voice coil for ease of wiring.

This subwoofer is not just another made with off-the-shelf parts, we wanted something better, and we knew our fanatics demand this as well. Since the original Power T2 subwoofer was designed by one of the leading loudspeaker engineers in the world, there were some lofty goals that had to be reached. Work was done from the ground-up to out-perform it's previous family members, while incorporating valuable feedback from our great network of Rockford Fosgate dealers. They wanted it bigger and badder with dual everything, and we feel that goal was crushed.

Why 13-inches?  Well, this is a combination of the cone and surround assembly described as the "total effective radiating area".  Since this model is so massive, we incorporated dual spiders for exceptional travel of the cone assembly. The motor structure operates very linear for exceptional sonic quality and the IDHS heat-sink gives the subwoofer impressive power handling capacity. Top it off with proprietary input terminals for large gauge cables to efficiently deliver the needed voltage, and this subwoofer is ready to drop the doom!

WARNING: Use caution when installing this subwoofer. It's heavier than Atlas holding a globe on his shoulders.

  • Three layer glass fiber/Aramid honeycomb/Glass fiber cone
  • Aluminum dustcap
  • Injection molded foam surround with VAST™
  • Proprietary surround mechanical clamping ring
  • Dual Nomex progressive spiders with integrated lead wires
  • Aluminum diecast frame with integrated heat sink fins
  • Custom push spring insulated 8 AWG terminals
  • Single layer edge wound aluminum 4" voice coil
  • Detachable die cast aluminum trim ring
  • Vented pole piece
  • Triple stack segmented ferrite motor structure
  • Integrated aluminum heat sinking shorting ring (IDHS)
  • 1 Year Warranty
CEA-2031
CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Inductive Damping Heat Sink
Inductive Damping Heat Sink

Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-Magnetic force). Also radiates heat to reduce voice coil temperature.

Klippel Verified
Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.

FlexFit Basket - Subwoofer
FlexFit Basket - Subwoofer

The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position. The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

VAST Surround - Subs
VAST Surround - Subs

Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing), which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%.

Anodized Aluminum Voice Coil Former
Anodized Aluminum Voice Coil Former

Two things generally happen when voice coils heat-up.

  • They can generate heat close to the melt-down temp of their adhesive bonds which leads to eventual failure.
  • Voice coil dc resistance increases and reduces SPL output.

Solution... Rockford Fosgate subwoofers use aluminum formers or voice coils for their excellent heat dissipation and SPL capabilities unlike many other plastic substitutes.">Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

Stitched Tinsel Leads
Stitched Tinsel Leads

Multipoint stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer. These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design. Improved reliability and performance by reducing fatigue and possible shorting.

Size: 13"
Subwoofer Type: Standard
CEA-2031 Compliant
CEA-2031 Guidelines
Nominal Impedance: 1-Ohm
Power Handling (Watts RMS): 2000 Watts RMS    4000 Watts Max
Speaker Connector: 8 AWG slot loaded
Voice Coil Type: Single Voice Coil
Qms: 2.93
Voice Coil Diameter: 3.96" (100 mm)
Magnet Weight (oz): 528 oz. (14.97 Kg)
Re (Ohms): 0.9
Vas (Liters): 69.3
Qes: 0.39
Fs (Hz): 25
Qts: 0.34
Sd (cm2): 707
Xmax (mm): 34
Le (mH): 0.53
SPL (dB @ 1w/1m): 87
Cutout Diameter: 12.28 in. (312 mm)
Mounting Depth: 9.70 in. (246 mm)
Woofer Displacement: 0.250 cu. ft. (7.08 Liters)
Sealed Box Volume (Vb): 1.85 cu. ft. (52.3 Liters)
Vented Box Volume (Vb): 4.0 cu. ft. (113 Liters)
Shipping Weight: 93.70 Lbs. (42.5 Kg.)