My Cart

Close

ALPINE

Alpine PSS-24WRA 300-Watt Complete Sound Jeep Upgrade Package

$1,999.95 USD $2,200.00 USD
PSS-24WRA

300-Watt Complete Sound Upgrade Package for the 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator

 

TOP-OFF SOUND UPGRADE

Your Jeep® begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018 – Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator.

 

COMPLETE PACKAGE

Go beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sound that replaces your factory system. The package includes two sets of 6.5” weather-resistant mid-bas drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer and a 4-channel power pack amplifier.

 

TUNED FOR JEEP

The PSS-24WRA sound system is tuned for the unique cabin environment of the 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator. The weather-resistant speakers are designed for powerful, top-off performance that’s unhindered by weather, wind, or other noise while driving. The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction. The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.

 

PLUG-AND-PLAY INSTALLATION

Vehicle-specific speaker connectors and pods designed for the 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator are included for plug-and-play installation. Tweeter adapter plates use the original factory tweeter locations to take the guesswork out of installation. Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.

 

SYSTEM COMPATIBILITY

The PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode. The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator.

 

FEATURES

  • Complete, five-channel powered sound system upgrade package
  • Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator
  • Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep® Wrangler Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U
  • 180W, 4-channel Power Pack amplifier
  • 120W, 8” powered subwoofer
  • (2x) 6.5” weather-resistant mid-bass drivers
  • (2x) 1” weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers
  • Vehicle specific front speaker pods with vehicle-specific connectors
  • SPV-65-JLT weather-resistant rear soundbar speaker system
  • Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling

 

TECH SPECS

  • Front (SPV-65X-WRA):
  • Power handling: 75 watts RMS (225 watts peak)
  • Frequency response: 65kHz – 22kHz
  • Nominal Impedance: 4Ω
  • Weather-resistant: IP55
  • Rear (SPV-65-JLT):
  • Power handling: 90 watts RMS (270 watts peak)
  • Frequency response: 50kHz – 22kHz
  • Nominal Impedance: 4Ω
  • Weather-resistant: IP55
  • Powered Subwoofer (PWE-S8):
  • 120 watts RMS (240 watts peak)
  • Frequency response: 32 - 150Hz
  • Variable low-pass crossover (80-200 Hz)
  • Variable phase control (0-180 degrees)
  • preamp- and speaker-level inputs
  • Four Channel Power Pack Amplifier (KTP-445U):
  • 45 watts RMS x 4 at 4 or 2 ohms
  • 90 watts RMS x 2 bridged at 4 ohms
  • Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)
  • Switchable RCA or speaker-level inputs
  • Dimensions: 27” L x 18.5” W x 19.5” H
  • 40lbs