The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

The P500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.

High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
1 Year Warranty

CEA-2006 Compliant

CEA-2006 Power Rating
150W x 2 @ 4Ω
≤1.0% THD+N

Number of Channels

Total Power
(Sum of Rated Power)

500 Watts

Rated Power
(RMS Continuous Power)

150 Watts x 2 @ 4-Ohm
250 Watts x 2 @ 2-Ohm
500 Watts x 1 @ 4-Ohm Bridged

Dynamic Power
(PVC/PowerCube®)

223 Watts x 2 @ 4-Ohms 0° Res
365 Watts x 2 @ 2-Ohms 0° Res

Bridgeable

Yes

Frequency Response

20Hz to 20kHz +/- 1.0dB

Input Sensitivity

150 mV - 12 V

Circuit Topology Class

Class A/B

Efficiency (average)

73% @ 4-Ohm

Total Harmonic Distortion (THD+Noise)

4-Ohm: <1.0%
2-Ohm: <1.0%

Signal Input

Hi/Low level: 1 RCA pair

Signal Output

Low level: 1 RCA pair

Tone Controls

Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position

Crossover Controls

High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes

Remote Controls

Optional Punch Level Control (PLC2) Ready

Visual Indicators

Power/Protect/Thermal LED
Input Clip LED³
Output Clip LED^1,2,3

LED Color Legend:
¹BLUE: <0.5% THD
²VIOLET: 1% THD
³RED: 10%+ THD

Power Wire Gauge

4 AWG

Power Input Connector

Captive C-Clamp

Speaker Wire Gauge

8 AWG to 18 AWG

Speaker Output Connector

Captive C-Clamp

Cooling

Convection

Heatsink

Operating Voltage

9 - 16 VDC

Recommended Fuse
(not included)

80 A

Average Current Draw (13.8V Music)

40 A

Max. Current Draw (13.8V Sinewave)

80 A

Suggested Alternator

75 A

Dimensional Diagram

Dimensions (H x W x D)

2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm)

Shipping Weight

12.3 Lbs. (5.57 Kg.)

ROCKFORD FOSGATE

P500X2