HERTZ
HERTZ ML Power 5
The ultra-versatile Hertzaudio car amplifier ML Power 5 (100 W x 4 + 550 W 2 Ω) provides the ability to drive a Mille system including the subwoofer. The HRC BM (Hertz Remote Control Bass Management), low frequencies level remote control, is optional.
Data table
| Channel mode | 5 - 3 |
|
Output Power (RMS) @ 14.4 VDC |
5 Ch 70 W x 4 + 380 W x 1 (4Ω) 5 Ch 100 W x 4 + 550 W x 1 (2Ω) 3 Ch 200 W x 2 (4Ω) + 380 W x 1 (4Ω) 3 Ch 200 W x 2 (4Ω) + 550 W x 1 (2Ω) |
|
Filters Hi-Pass Lo-Pass Band-Pass |
A Ch: 40 ÷ 150 Hz @ 12 dB/Oct. - B Ch: 80 ÷ 3.3k Hz @ 12 dB/Oct. C Ch: 40 ÷ 500 Hz @ 24 dB/Oct. A Ch: 40 ÷ 150 Hz @ 12 dB/Oct. - 80 ÷ 3.3k Hz (LO) @ 12 dB/Oct. |
|
Distortion - THD (100Hz @ 4Ω) |
0.08 % |
|
S/N Ratio (A weighted @ 1V) |
100 dB A & B Ch - 106 dB C Ch |
|
Damping factor (100Hz @ 4Ω) |
50 A & B Ch - 90 C Ch |
|
Size W x D x H mm (in.) |
170 x 349 x 46.70 - (6.69' x 13.74' x 1.84') |
Technologies
-
ADVANCED D-CLASS TECHNOLOGY
Ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. -
LEDS STATUS DISPLAY
It monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages. -
HDP IN & ART(TM)
The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”. -
ADVANCED HEATSINK
The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.