CONNECT EVERYTHING
The C 379 is well equipped with a variety of analogue and digital connectivity options including aptX HD Bluetooth, HDMI eARC, MM Phono stage, and two subwoofer outputs. aptX HD can easily support 24-bit streaming from any Bluetooth enabled device, while HDMI eARC allows you to connect the C 379 to your TV and provide seamless control from your existing remote. It also includes a built-in high-performance headphone amplifier with low output impedance and high output voltage capability, allowing it to drive a wide range of headphones.
Features & Details
- Customised HybridDigital UcD Amplifier with Stereo and Bridge Modes
- 2 x 80 Watts per channel of Continuous Power (8 and 4 Ohms)
- 2 x 120 Watts per channel of Dynamic Power (4 Ohms)
- Bridgeable for up to 300 Watts per channel of Continuous Power
- Industry-leading ESS SABRE® PRO 32-bit/384kHz DAC
- Dual MDC 2 Ports for Future Upgrades and Expanded Features
- MM Phono Stage with Accurate RIAA Equalization and Ultra-Low Noise
- Built-in Separate Headphone Amplifier for Low and High Impedance
- HDMI eARC, Optical Digital and Coax Digital Inputs
- Dual Subwoofer Outputs
Preliminary Specifications
LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz) |
<0.002 % at 2 V out |
Signal-to-Noise Ratio |
>106dB (IHF; A-weighted, ref. 500 mV out, unity gain) |
Channel separation |
>100dB (1 kHz); >90 dB (10 kHz) |
Input Impedance (R and C) |
56 kohms + 100 pF |
Maximum input signal |
>4.6 Vrms (ref. 0.1 % THD) |
Output impedance |
Source Z + 320 ohms |
Input sensitivity |
65mV (ref. 500 mV out, Volume maximum) |
Frequency response |
±0.3 dB (20 Hz – 20 kHz) |
Maximum voltage output -IHF load |
>>5 V (ref. 0.1 % THD) |
PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz) |
<0.01% at 2 V out |
Signal-to-Noise Ratio |
>84dB (200 ohms source; A-weighted, ref. 500 mV out) |
Input sensitivity |
46 kohms/100 pF |
Frequency response |
±0.3 dB (20 Hz – 20 kHz) |
Maximum input signal at 1kHz |
>80 mVrms (ref. 0.1 % THD) |
LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz) |
<0.005% at 1V out |
Signal-to-Noise Ratio |
>107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain |
Frequency response |
±0.3 dB (20 Hz – 20 kHz) |
Channel separation |
>62 dB at 1kHz |
Output impedance |
2.2 Ohms |
LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
Continuous output power into 8 ohms and 4 ohms |
2 x 80W (ref. 20 Hz-20 kHz at rated THD, both channels driven) |
Continuous output power into 8 Ohms (Bridge mode)<s/trong> |
300W (ref. 20 Hz – 20 kHz at THD 0.03%) |
THD (20 Hz – 20 kHz) |
<0.03% (250 mW to 80 W, 8 ohms and 4 ohms) |
IHF dynamic power |
120W into 8 ohms 200W into 4 ohms 250W into 2 ohms |
Peak output current |
>26A (in 1 ohm, 1ms) |
Damping factor |
>150 (ref. 8 ohms, 20Hz to 6.5kHz) |
Frequency response |
>±0.3 dB (20 Hz – 20 kHz) |
Channel separation |
>90dB (1 kHz) >75dB (10 kHz) |
Input sensitivity (for 80 W in 8 ohms) |
Line In: 201 mV, Digital In: 10.25% FS |
GENERAL SPECIFICATIONS
Supports bit rate/sample rate |
up to 32 bit/384 kHz |
Frequency band |
2.402GHz- 2.480GHz |
Maximum transmit power (dBm) |
7 dBm ± 2 dBm |
DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D) |
435 x 100 x 390mm (17.1 x 3.9 x 15.4“) |
Net Weight |
8.7kg (19.1lb) |
Shipping weight |
~11kg (24.2lb) |